1、in和exists

in是把外表和内表作hash连接,而exists是对外表作loop循环,每次loop循环再对内表进行查询,一直以来认为exists比in效率高的说法是不准确的。如果查询的两个表大小相当,那么用in和exists差别不大;如果两个表中一个较小一个较大,则子查询表大的用exists,子查询表小的用in;

例如:表A(小表),表B(大表)

select * from A where cc in(select cc from B)  -->效率低,用到了A表上cc列的索引;

select * from A where exists(select cc from B where cc=A.cc)  -->效率高,用到了B表上cc列的索引。

相反的:

select * from B where cc in(select cc from A)  -->效率高,用到了B表上cc列的索引

select * from B where exists(select cc from A where cc=B.cc)  -->效率低,用到了A表上cc列的索引。

 

2、not in 和not exists

not in 逻辑上不完全等同于not exists,如果你误用了not in,小心你的程序存在致命的BUG,请看下面的例子:

复制代码
create table #t1(c1 int,c2 int);

create table #t2(c1 int,c2 int);

insert into #t1 values(1,2);

insert into #t1 values(1,3);

insert into #t2 values(1,2);

insert into #t2 values(1,null);

 

select * from #t1 where c2 not in(select c2 from #t2);  -->执行结果:无

select * from #t1 where not exists(select 1 from #t2 where #t2.c2=#t1.c2)  -->执行结果:1  3

正如所看到的,not in出现了不期望的结果集,存在逻辑错误。如果看一下上述两个select 语句的执行计划,也会不同,后者使用了hash_aj,所以,请尽量不要使用not in(它会调用子查询),而尽量使用not exists(它会调用关联子查询)。如果子查询中返回的任意一条记录含有空值,则查询将不返回任何记录。如果子查询字段有非空限制,这时可以使用not in,并且可以通过提示让它用hasg_aj或merge_aj连接。

如果查询语句使用了not in,那么对内外表都进行全表扫描,没有用到索引;而not exists的子查询依然能用到表上的索引。所以无论哪个表大,用not exists都比not in 要快。

 

3、in 与 = 的区别

select name from student where name in('zhang','wang','zhao');

select name from student where name='zhang' or name='wang' or name='zhao'

的结果是相同的。

-----

其他分析:

1.EXISTS的执行流程 
select * from t1 where exists ( select null from t2 where y = x ) 

可以理解为: 
for x in ( select * from t1 ) loop 

if ( exists ( select null from t2 where y = x.x ) then 
OUTPUT THE RECORD 
end if 
end loop 


对于in 和 exists的性能区别: 
如果子查询得出的结果集记录较少,主查询中的表较大且又有索引时应该用in,反之如果外层的主查询记录较少,子查询中的表大,又有索引时使用exists。 
其实我们区分in和exists主要是造成了驱动顺序的改变(这是性能变化的关键),如果是exists,那么以外层表为驱动表,先被访问,如果是IN,那么先执行子查询,所以我们会以驱动表的快速返回为目标,那么就会考虑到索引及结果集的关系了 


另外IN时不对NULL进行处理 
如: select 1 from dual where null in (0,1,2,null) 为空 


2.NOT IN 与NOT EXISTS: 
NOT EXISTS的执行流程 
select ..... from rollup R  where not exists ( select 'Found' from title T where R.source_id = T.Title_ID); 
可以理解为: 
for x in ( select * from rollup ) loop 
if ( not exists ( that query ) ) then 
OUTPUT 
end if; 
end loop; 


注意:NOT EXISTS 与 NOT IN 不能完全互相替换,看具体的需求。如果选择的列可以为空,则不能被替换。 


例如下面语句,看他们的区别: 
select x,y from t; 

查询x和y数据如下:
x y 
------ ------ 
1 3 
3 1 
1 2 
1 1 
3 1 


使用not in 和not exists查询结果如下:
select * from t where x not in (select y from t t2 ) ;
查询无结果:no rows


select * from t where not exists (select null from t t2 where t2.y=t.x ) ;

查询结果为:
x y 
------ ------ 
5 NULL 


所以要具体需求来决定 


对于not in 和 not exists的性能区别: 
not in 只有当子查询中,select 关键字后的字段有not null约束或者有这种暗示时用not in,另外如果主查询中表大,子查询中的表小但是记录多,则应当使用not in,并使用anti hash join. 
如果主查询表中记录少,子查询表中记录多,并有索引,可以使用not exists,另外not in最好也可以用/*+ HASH_AJ */或者外连接+is null 
NOT IN 在基于成本的应用中较好 


比如: 
select ..... 
from rollup R 
where not exists ( select 'Found' from title T 
where R.source_id = T.Title_ID); 


改成(佳) 


select ...... 
from title T, rollup R 
where R.source_id = T.Title_id(+) 
and T.Title_id is null; 


或者(佳) 
sql> select /*+ HASH_AJ */ ... 
from rollup R 
where ource_id NOT IN ( select ource_id 
from title T 
where ource_id IS NOT NULL ) 


讨论IN和EXISTS。 
select * from t1 where x in ( select y from t2 ) 
事实上可以理解为: 
select * 
from t1, ( select distinct y from t2 ) t2 
where t1.x = t2.y; 
——如果你有一定的SQL优化经验,从这句很自然的可以想到t2绝对不能是个大表,因为需要对t2进行全表的“唯一排序”,如果t2很大这个排序的性能是 不可忍受的。但是t1可以很大,为什么呢?最通俗的理解就是因为t1.x=t2.y可以走索引。但这并不是一个很好的解释。试想,如果t1.x和t2.y 都有索引,我们知道索引是种有序的结构,因此t1和t2之间最佳的方案是走merge join。另外,如果t2.y上有索引,对t2的排序性能也有很大提高。 
select * from t1 where exists ( select null from t2 where y = x ) 
可以理解为: 
for x in ( select * from t1 ) 
loop 
if ( exists ( select null from t2 where y = x.x ) 
then 
OUTPUT THE RECORD! 
end if 
end loop 
——这个更容易理解,t1永远是个表扫描!因此t1绝对不能是个大表,而t2可以很大,因为y=x.x可以走t2.y的索引。 
综合以上对IN/EXISTS的讨论,我们可以得出一个基本通用的结论:IN适合于外表大而内表小的情况;EXISTS适合于外表小而内表大的情况。 
我们要根据实际的情况做相应的优化,不能绝对的说谁的效率高谁的效率低,所有的事都是相对的

相关评论(0)
您是不是忘了说点什么?

友情提示:垃圾评论一律封号...

还没有评论,快来抢沙发吧!